Four crucial points for a successful NX CAM implementation

Keep these Dos in mind for a great NX CAM implementation process

02/27/2023

Four Dos for a successful NX CAM implementation

What makes a transition to a new CAM system successful, can rarely be summed up in a few words. Nevertheless, there are certain set screws that make a big difference if you turn them the right way.

We have compiled four of the most important DOs for you here.

1. Find the right Siemens Solutions Partner

As the first step in the changeover to NX CAM, the decision for a service partner (such as JANUS Engineering AG) immensely determines the subsequent project flow. Depending on what you value in the system change, there are a number of things to consider when making your selection. You can find a detailed decision support here: "Finding the right service partner for NX CAM".

2. Putting together a good team

In addition to the external companions, the success of the implementation project also requires the right internal project team. Of course, all affected employee:s should be involved in the entire process. However, this is even more successful with a motivated team that supports the changeover. The project team is available to the service provider as a contact person and strives to continue to get the best out of NX CAM for your production. Discuss with the users who see themselves in this role and support the selected colleagues in the further course of the project.

3. Carry out a process analysis (or have one carried out)

An important factor for process optimization in manufacturing is process analysis. But it is also worthwhile to start with such an analysis when introducing NX CAM for the first time. In this way, potentials can be identified early on and taken into account during setup. Ideally, an experienced Siemens Solutions Partner will be at your side for the process analysis.

4. Place a lot of emphasis on training and education

Future users should be trained for NX CAM early on in the implementation project. With enough time and many repetitions of the training sessions, the changeover to the new system is guaranteed to succeed. Generous training slots in the implementation plan also give your colleagues the necessary security and confidence that the system changeover will not result in any disadvantages for the users concerned. When selecting your service partner, it is best to make sure that they also offer training and education for your users.

If you take care of these four points during your NX CAM implementation, you will have already gained a lot. Would you like to learn more about what is required for a successful changeover to NX CAM? Then check out our whitepaper for more in-depth explanations of everything you need to consider.